Clevis Pins

Clevis Pins

Clevis Pins are a custom pin/rivet with a hole drilled in the shaft. Jay-Cee Sales does stock some clevis pins. Please call for more information on available stock or manufactured minimums.

Clevis Pins Specifications

Nominal
Size
or Basic
Pin
Diameter

Recom-
mended
Cotter
Pin
Nominal
Size

Shank
Diameter

Head
Diameter

Head
Height

Hole
Diameter

Point
Diameter

Pin
Length

Head to
Center
of Hole

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Basic

Max

Min

3/16

0.186

0.181

0.320

0.300

0.070

0.050

0.088

0.073

0.15

0.14

0.58

0.504

0.484

1/16

0.062

1/4

0.248

0.243

0.380

0.360

0.100

0.080

0.088

0.073

0.21

0.20

0.77

0.692

0.872

1/16

0.062

5/16

0.311

0.306

0.440

0.420

0.100

0.080

0.119

0.104

0.26

0.25

0.94

0.832

0.812

3/32

0.093

3/8

0.373

0.368

0.510

0.490

0.130

0.110

0.119

0.104

0.33

0.32

1.06

0.958

0.938

3/32

0.093

7/16

0.436

0.431

0.570

0.550

0.160

0.140

0.119

0.104

0.39

0.38

1.19

1.082

1.062

3/32

0.093

1/2

0.496

0.491

0.630

0.610

0.160

0.140

0.151

0.136

0.44

0.43

1.36

1.223

1.203

1/8

0.125

1/2

0.496

0.491

0.630

0.610

0.160

0.140

0.161

0.151

0.44

0.43

2.50

2.353

2.340

1/8

0.125

5/8

0.621

0.616

0.820

0.800

0.210

0.190

0.151

0.136

0.56

0.55

1.16

1.473

1.453

1/8

0.125

3/4

0.746

0.741

0.940

0.920

0.260

0.240

0.182

0.167

0.68

0.67

1.91

1.739

1.719

5/32

0.156

7/8

0.871

0.866

1.040

1.020

0.320

0.300

0.182

0.167

0.80

0.79

2.16

1.989

1.969

5/32

0.156

0.996

0.991

1.190

1.170

0.350

0.330

0.182

0.167

0.93

0.92

2.41

2.239

2.219

5/32

0.156

1. Lengths tabulated are intended for use with standard clevises, without spacers.
  Where required, it is recommended that other pin lengths be limited, if possible
  to nominal length increments of 0.06 in.
2. Basic "J" dimension (distance from centerline of hole to end of pin) is specified
  for calculating hole location from underside of head on pins of lengths not tabulated.
3. Reference dimension provided for convenience in design layout and is not subject
  to inspection.

Click here is you need Cotter Pins for your clevis pins?